notepad++ 软件下载 https://notepad-plus-plus.org/zh/
运行 notepad++
点击菜单栏上的“搜索”
点击“文件查找”
“查找目标”里输入要查找的关键词
“目录”这一项选择要查找的所在目录
配置好后,点“全部查找”
查找结果会在下面给出所有列表,双击行会进入对应文件
notepad++ 软件下载 https://notepad-plus-plus.org/zh/
运行 notepad++
点击菜单栏上的“搜索”
点击“文件查找”
“查找目标”里输入要查找的关键词
“目录”这一项选择要查找的所在目录
配置好后,点“全部查找”
查找结果会在下面给出所有列表,双击行会进入对应文件
运行 Beyond Compare 软件,然后点击左上角菜单栏“会话”,“新建会话”,“十六进制比较”,然后把要对比的两个EXE文件拖曳到左边和右边。
一.错误信息提示如下:
编译器错误信息: CS0016:未能写入输出文件: '*:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\Temporary ASP.NET Files\*\*.dll'--拒绝访问."
原因1:权限问题,访问权限问题。
解决方法1:为用户NETASP(NETWORK SERVICE [window 2003])设置windows下Temp文件夹的所有权限
解决方法2:
1、如果C:/Windows目录下没有Temp文件夹,则创建一个;
2、右键Temp文件夹--属性--安全,添加一个用户"NETWORK SERVICE ",(如果是.NET Framework 1.0 则添加用户"aspnet user"), "赋予权限--完全控制;
3、右击"我的电脑"-"属性"-"高级"-"环境变量",选择系统变量下的"TEMP",点编辑,设置变量值为 %SystemRoot%\TEMP,确定,再对"TMP"进行同样的操作,点击确定;
4、重启IIS服务,问题解决。
原因2:服务被某些优化软件禁止。
解决方案:
1、ASP.NET State Service被停止了,重新启动ASP.NET State Service服务,并设为自动。
2、开始-运行-iisreset;。
3、OK
参考
二、 另外还有一个 Access denied 的错误说是不能访问 C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\Temporary ASP.NET Files 下的某个目录。产生这些错误的原因很多,主要的可能包括:Bin 目录或者 Web.config 被更改以及访问文件系统的权限不够。
如果 Bin 目录或者 Web.config 被更改,MSDN 网站上有文章说是因为 Microsoft Index Services(Indexing Service) 服务在运行。 详细内容可以访问: PRB: Access Denied Error When You Make Code Modifications with Index Services Running 。
但是另外还需要注意一些别的问题,
综上所述的方法,主要包括:
三、在 Windows2003 下(IIS6),出现如下错误信息:
出现CS0016的原因一般是临时目录的权限不够,至于为什么中途出现这种问题,我尚不清楚,解决的办法是给Windows目录下的临时文件夹Temp的安全选项卡中加入NetWork Service用户并赋予全权。更详尽的解释参考MSDN。
MSDN给出的解释如下:
When you view a Microsoft ASP.NET Application in a Web browser, you may receive the following error messages:
For the Microsoft .NET Framework version 1.1, the error message is the following: CS0016: Could not write to output file 'c:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\Temporary ASP.NET Files\application1\c11b43f6\cf3ec03\rizcntet.dll' . The directory name is invalid. For the .NET Framework 1.0, the error message is the following: CS0013: Unexpected error writing metadata to file 'C:\WINDOWS\Microsoft.NET\Framework\v1.0.3705\Temporary ASP.NET Files\application2\3fc72f26\eb731247\ev2bslce.dll'. The directory name is invalid.
CAUSE The system TEMP and TMP variables point to a folder that does not exist. The compiler generates temporary files in the folder where the TEMP and the TMP variables point to before the files are copied to the Temporary ASP.NET Files folder. However, the folder where the system variables point to is deleted when you restart the computer. Therefore, the compiler cannot generate the temporary files.
RESOLUTION 1. Create a temporary folder under %Systemroot%, and then name it Temp. 2. Grant full permissions on the Temp folder to the aspnet user account in .NET Framework 1.0 or to the NETWORK SERVICE user account in .NET Framework 1.1. 3. Right-click My Computer, and then click Properties. 4. On the Advanced tab, click Environment Variables. 5. Select the TEMP variable under System variables, and then click Edit. 6. Type %SystemRoot%\TEMP in the Variable Value box, and then click OK. 7. Repeat steps 5 and 6 to edit the TMP variable. Click OK two times. 8. Click Start, and then click Run. 9. To reset Internet Information Services (IIS), type iisreset on the command prompt.
Note If the error message that is mentioned in the "Symptoms" section of this article persists, restart the computer.
开始菜单,右击“计算机”-“管理”,进入“设备管理器”,进入鼠标或键盘,右击鼠标或键盘选“属性”,进入“电源管理”,勾去“允许此设备唤醒计算机”前面的勾。
命令提示符输入一条命令后,显示了很多条内容,用滚动条也只能看到最后一部分,解决方法:
可以在你输入的命令后面加一个 | more
例如:进入一个目录进行分屏显示
D:
dir | more
SLC=Single-LevelCell,即1bit/cell,速度快寿命长,价格超贵(约MLC3倍以上的价格),约10万次擦写寿命
MLC=Multi-LevelCell,即2bit/cell,速度一般寿命一般,价格一般,约3000---10000次擦写寿命
TLC=Trinary-LevelCell,即3bit/cell,也有Flash厂家叫8LC,速度慢寿命短,价格便宜,约500次擦写寿命,目前还没有厂家能做到1000次。
从上面可以看出,SLC的性能最优,价格超高。一般用作企业级或高端发烧友。MLC性能够用,价格适中为消费级SSD应用主流,像intel,OCZ,金士顿,美光等主流品牌产品大多为MLC,TLC综合性能最低,价格最便宜。
右击这个文件或文件夹-属性-安全,选择 Administrators,下面的权限随便勾一个点应用,然后再取消刚才的勾点应用,此时会重置此文件或文件夹的权限,举一反三。
1.5平方 直径 1.38mm
2.5平方 直径 1.78mm
2.57平方 直径 1.81 mm
4平方 直径 2.25mm
4.01平方 直径 2.26 mm
5.43平方 直径 2.63 mm
6平方 直径 2.76mm
6.29平方 直径 2.83 mm
标称截面积=单根铜线半径的平方*3.14(圆周率)*铜线根数
要屏蔽某个好友的动态,设置如下:
1.进入自己QQ空间;
2.点击“个人中心”;
3.在“全部动态”的右边有一个“齿轮”形状的东东,点击它;
4.在弹出的选项“我隐藏的好友”右边选择“添加”;
5.在弹出的新菜单里,找到对方昵称,然后把他昵称旁边的“勾勾”勾上;
6.点击“确定”即可。
在浏览器的地址栏中输入192.168.0.1回车,进入后点“高级设置”,“上网设置”-“上网方式”选“自动获取” 进入“无线设置”里的“无线桥接”,“模式选择”里选“WISP模式”,点击下面的“开始扫描”按钮 选择要中继的无线信号,然后在“密钥”一栏填入要中继信号的无线密码,最后点“确定”按钮
如果要设置本路由器的无线名称和密码,如下设置: “无线设置”-“无线基本设置”里,“次无线信号名称”填入你想要改的无线信号名,然后点“确定”,此时无线终端手机或电脑要重新设置连接新的无线信号名称。如要修改密码,在“无线设置”-“无线加密”里,在“选择无线信号名称”里选择你的无线信号,“安全模式”里选择加密方式,然后填入需要加密的密码,点“确定”即可。